My 12x28 Wood Jon Boat with GX200 & Small Kit Build

User avatar
JTP
Posts: 276
Joined: Thu Mar 19, 2015 2:28 pm
Location: McKinney, Texas
Location: McKinney, Texas

My 12x28 Wood Jon Boat with GX200 & Small Kit Build

Post by JTP »

Decided to do a long & skinny wood Jon boat this time. I think that she's going to be fast 8-)
Attachments
FullSizeRender 3.jpg
FullSizeRender 4.jpg
12x28 adjustable seats.png
Small Kit.JPG
jtp's 12x28 wood Jon stained.JPG
jtp's 12x28 interior.JPG
jtp's 12x28 engine mount front.JPG
12x28motor mount rear.JPG
15x42x15 Waco & 670 Predator V Twin
12x28x12 wood Jon & GX200

SourMash
Posts: 602
Joined: Mon Dec 15, 2014 6:24 am
Location: Covington, GA
Location: Covington, GA

Re: My 12x28 Wood Jon Boat with GX200 & Small Kit Build

Post by SourMash »

That narrow boat sure does make the 200 look huge! Can't wait to see some numbers!!! Good luck
13' Gheenoe - 212 Predator
1436 G3 - 420 Predator

User avatar
JD
Posts: 940
Joined: Tue Jan 17, 2012 3:19 pm
Location:
Location: Palmetto, FL

Re: My 12x28 Wood Jon Boat with GX200 & Small Kit Build

Post by JD »

NOTHING rides better than a wood boat!
Psalm 55:7 - Lo, then would I wander far off, and remain in the wilderness.

User avatar
JTP
Posts: 276
Joined: Thu Mar 19, 2015 2:28 pm
Location: McKinney, Texas
Location: McKinney, Texas

Re: My 12x28 Wood Jon Boat with GX200 & Small Kit Build

Post by JTP »

Got a first layer of bar top epoxy on the bottom. Will do a light sanding and go one more coat. Should hold up pretty well.
Attachments
bar top epoxy.JPG
15x42x15 Waco & 670 Predator V Twin
12x28x12 wood Jon & GX200

User avatar
JTP
Posts: 276
Joined: Thu Mar 19, 2015 2:28 pm
Location: McKinney, Texas
Location: McKinney, Texas

Re: My 12x28 Wood Jon Boat with GX200 & Small Kit Build

Post by JTP »

First shop run.

15x42x15 Waco & 670 Predator V Twin
12x28x12 wood Jon & GX200

User avatar
jmscherrman
Posts: 535
Joined: Mon Oct 21, 2013 8:25 pm
Location: PC, Iowa
Location: Prairie City, IA

Re: My 12x28 Wood Jon Boat with GX200 & Small Kit Build

Post by jmscherrman »

That thing should be fast, excited to see how she does!

Post Reply