23 hp Motor Briggs Vanguard, 627cc, 1-1/8″, Electric & Recoil Start, 16 Amp Alternator – 386447-0444-G1
Out of stock
The 23-hp motor by Vanguard, Briggs and Stratton has 627cc with a 1-1/8" PTO shaft. Being a two-cylinder engine, you will get less vibration compared to a single-cylinder engine.
- Horsepower = 23
- Displacement = 627cc
- Torque = 35 ft-lbs Gross Torque, 32 ft-lbs Net Torque
- Weight = 77 lbs (without muffler)
- Dimensions = 17.75" tall, 16" wide, 12.5" deep (without muffler and additions)
- Recoil Starter AND Electric Start
- 50-State CARB Compliant
- Horizontal 1.125” Keyway Shaft that is 4” long
- 3-year Manufacturer Limited Warranty (consumer)
- 3-year Manufacturer Limited Warranty (commercial)
- Assembled with a Fuel Pump but NO Fuel Tank
- 16 Amp Charging System
- Manual or Remote Choke Control
- Dura-Bore Cast Iron Cylinder Sleeve
- Does NOT come with mufflers unless you use the checkboxes
This 23-hp motor is a perfect match for our Large Swamp Runner Kit. We also offer the High Mount, Center Outlet Muffler (part #808911) +$162.
We chose this muffler style because it locates the muffler up and out of the way of the PTO shaft, allowing easy install and maintenance of your Swamp Runner kit.
INVENTORY: Pending stock confirmation. Once inventory is secured, you will be charged. If this item is out of stock or has a waiting period, we will notify you before charging you.
SHIPPING: By freight to the continental United States only. This item does not ship to Alaska, Hawaii, Puerto Rico, or Canada.
Upon delivery immediately inspect items. If damaged, photograph the damage, refuse to accept the item from the carrier, and contact Swamp Runner immediately.
RETURN POLICY: This item ships directly from the manufacturer, and they DO NOT ACCEPT RETURNS (unless an item is damaged or an incorrect item is shipped)
WARRANTY: 3 Year Manufacturer’s Warranty
For warranty, repairs contact your nearest Authorized Briggs & Stratton Service Center
Model Series 3864
Oil Capacity 48 oz (1.4 l)
Valve Configuration OHV
Flywheel Torque 125 lb/ft (169.5 Nm)
Governor Arm Torque 115 lb/in (13.0 Nm)
Carb Mount 65 lb/in (7.5 Nm)
Plug Gap 0.03 in (0.75 mm)
Intake Valve .004-.006 in (.10-.15 mm)
Exhaust Valve .004-.006 in (.10-.15 mm)
Idle Speed 1750
Air Gap .008-.012 in (.20-.30 mm)
Flywheel Puller Part 19203
Flywheel Holder Part 19433
Connecting Rod Torque 115 lb/in (13.0 Nm)
Sump Torque 150 lb/in (17.0 Nm)
Head Torque 165 lb/in (18.5 Nm)
Top No Load (rpms) 3600
Vanguard Commercial Series _ Consumer Use & Commercial Use 36 Month Warranty _ Please view the Operators Manual for more information.
Only logged in customers who have purchased this product may leave a review.