Product Categories

Mini Swamp Runner Box (2.5-3hp)

$399.00

We recommend our MINI SWAMP RUNNER™ kits for layout boats, canoes, sneak boxes and other small displacement hulls. Recommended transom height 12″ or less for optimum shaft angle.

Kit Weight: 30 lbs.

Ships Fedex Ground in Two Parcels – Signature Required

In stock

SKU: 10kt10x
SKU: 10kt10x

Product Description

Mini Swamp Runner Box (2.5-3hp)

$399.00

We recommend our MINI SWAMP RUNNER™ kits for layout boats, canoes, sneak boxes and other small displacement hulls. Recommended transom height 12″ or less for optimum shaft angle.

Kit Weight: 30 lbs.

Ships Fedex Ground in Two Parcels – Signature Required

In stock

SKU: 10kt10x

Our Mini Swamp Runner™ Kit includes every part needed to build a longtail motor except for the engine.  Each kit includes:

  • Coupler Assembly with Gimble Pivot (hot dipped in galvanize followed by a coating of paint)
  • Transom Bracket
  • Tiller Handle (hot dipped in galvanize followed by a coating of paint
  • Tiller Handle Mounting Bracket
  • Stainless Steel Throttle Lever w/ ball bearings
  • Stainless Steel Throttle Cable
  • 75" Shaft Assembly (shaft housing hot dipped in galvanize)
  • Tethered Kill Switch Assembly & Mounting Bracket
  • Other hardware required for assembly.
  • Comes standard with (2) Aluminum Surface Piercing Propellers

 

MakeHPModels
Honda3hp (98cc)GX100QA2
Carroll Stream - Engine2.5hp (79cc)CS152
Harbor Freight - Predator Engine3hp (79cc & 99cc)
69733 & 68124
Home Depot - Lifan Engine3hp (97cc)LF152F-3Q
LCT3hp (79cc & 98cc)CMXX 79cc & CMXX 98cc
Surplus Center - Powerpro Engine2.5hp (79cc)2549-0042

*The information in this table is provided by MudMotorKit.com as a courtesy service to our customers, and should only be used as a guide to help you choose a kit and match your engine with it. We could not possibly list information that would apply to all engines that are available and will fit our kits.  While every effort has been made to provide useful information, the information may change.  So, it is your responsibility to verify engine specs with the manufacturer of your engine prior to ordering.

Engine requirements

Without physically seeing and measuring your engine, we cannot guarantee this kit will fit other engines not listed above.  If your engine is not listed above, you will need to consult the engine manufacturer, or take some measurements of your engine to ensure it meets the following requirements;

  • The engine must have a horizontal output shaft.
  • The output shaft must be 5/8 inch (15.875mm) diameter (non-tapered) with keyway.
  • The engine side cover bolt circle diameter must be: 3 5/8 inches (92.08mm)
  • Tiller Bracket mounting bolt pattern must be: 3 1/8″ (80.5mm) or 2.4″ (61.5mm)
  • Most of these engines listed above do not come with a remote throttle hookup. Remote throttle kits are available from Affordable Go-Karts.

NOTE: This kit is NOT compatible with the Honda GXH50, GX120, GX200, Predator 212, or engines equipped with gear reduction.

 

 Swamp Runner®
by SPS
Mud-Skipper
(KKK/CKS)
Beaver Dam
(CLP)
Offers a Mini Kit that weighs under under 30 lbs, for a complete mud motor weight of less than 50 lbs.yesnono
Heavy-duty steel Coupler Housing
is coated with zinc & then powder coated for superior corrosion protection
yesnono
Cast Aluminum
Coupler Housings, Coupler Shafts, and Coupler Sleeve Joints so tough they come with a LIFETIME WARRANTY to the original owner against cracking or breakingyesnono
Squeeze type throttle lever that has the full throttle travel of your engine.yesnono
Stainless steel throttle cableyesnono
More than 50 different props available including standard props, weedless props, performance props, stainless props, racing props, and even props that come with a .25" bore so you can tap it yourself!yesnono
Offers a weed cutter that can be mounted on the skeg.yesnono

Additional Information

Weight 30 lbs
admin

MakeHPModels
Honda3hp (98cc)GX100QA2
Carroll Stream - Engine2.5hp (79cc)CS152
Harbor Freight - Predator Engine3hp (79cc & 99cc)
69733 & 68124
Home Depot - Lifan Engine3hp (97cc)LF152F-3Q
LCT3hp (79cc & 98cc)CMXX 79cc & CMXX 98cc
Surplus Center - Powerpro Engine2.5hp (79cc)2549-0042

*The information in this table is provided by MudMotorKit.com as a courtesy service to our customers, and should only be used as a guide to help you choose a kit and match your engine with it. We could not possibly list information that would apply to all engines that are available and will fit our kits.  While every effort has been made to provide useful information, the information may change.  So, it is your responsibility to verify engine specs with the manufacturer of your engine prior to ordering.

Engine requirements

Without physically seeing and measuring your engine, we cannot guarantee this kit will fit other engines not listed above.  If your engine is not listed above, you will need to consult the engine manufacturer, or take some measurements of your engine to ensure it meets the following requirements;

  • The engine must have a horizontal output shaft.
  • The output shaft must be 5/8 inch (15.875mm) diameter (non-tapered) with keyway.
  • The engine side cover bolt circle diameter must be: 3 5/8 inches (92.08mm)
  • Tiller Bracket mounting bolt pattern must be: 3 1/8″ (80.5mm) or 2.4″ (61.5mm)
  • Most of these engines listed above do not come with a remote throttle hookup. Remote throttle kits are available from Affordable Go-Karts.

NOTE: This kit is NOT compatible with the Honda GXH50, GX120, GX200, Predator 212, or engines equipped with gear reduction.

 

 Swamp Runner®
by SPS
Mud-Skipper
(KKK/CKS)
Beaver Dam
(CLP)
Offers a Mini Kit that weighs under under 30 lbs, for a complete mud motor weight of less than 50 lbs.yesnono
Heavy-duty steel Coupler Housing
is coated with zinc & then powder coated for superior corrosion protection
yesnono
Cast Aluminum
Coupler Housings, Coupler Shafts, and Coupler Sleeve Joints so tough they come with a LIFETIME WARRANTY to the original owner against cracking or breakingyesnono
Squeeze type throttle lever that has the full throttle travel of your engine.yesnono
Stainless steel throttle cableyesnono
More than 50 different props available including standard props, weedless props, performance props, stainless props, racing props, and even props that come with a .25" bore so you can tap it yourself!yesnono
Offers a weed cutter that can be mounted on the skeg.yesnono

Additional Information

Weight 30 lbs
admin

Pin It on Pinterest

Share This